Mill Bridge on the Cadron - a good put in???

Recreational and touring boaters
Post Reply
       
User avatar
Wildwood
.....
.....
Posts: 717
Joined: Mon Feb 15, 2010 11:10 am
Name: Jan Johnson
Location: Van Buren County

Mill Bridge on the Cadron - a good put in???

Post by Wildwood » Thu Mar 24, 2011 9:27 pm

I'm wondering why I've not seen the Mill Bridge on here as a put in on the Cadron Creek. I passed there today. Lots of folks were enjoying the creek. It's a beautiful, easy put in spot. Is there a reason we do not use it??
Jan
Jan Johnson

"Life shouldn't be a journey to the grave intending to arrive safely in an attractive, well preserved body, but rather to skid in sideways, a paddle in your hands, body totally worn out and screaming "WOO HOO what a ride!"

User avatar
Jim Krueger
.....
.....
Posts: 1867
Joined: Thu Jun 30, 2005 1:54 pm
Location: Benton, AR

Re: Mill Bridge on the Cadron - a good put in???

Post by Jim Krueger » Fri Mar 25, 2011 8:52 am

Jan,

About 9 years ago Marlo and I made our first trip on the Cadron, we were put-in near the town of Quitman and floated the 12 miles or so back down to Cadron Creek Outfitters. When we crossed under the Mill Bridge, I too wondered about it as an access. When I asked about it later I was told that the local landowners weren't too keen about it. I haven't been back there but have recently thought more about it. Looking at it recently on Google Earth 'street view', it didn't look like much parking opportunities. I'll look forward to seeing it again and hearing others opinions.
From floating all this section, it seems to me that the float from Mill Bridge to Hwy 65 might be nearly 15 miles or so, too long for me... and the best WW features are mainly in the last 6 or 7 miles.

Best Regards
Jim

User avatar
Shark Attack
....
....
Posts: 443
Joined: Fri Aug 19, 2005 5:09 pm
Location: Round Mountain, AR

Re: Mill Bridge on the Cadron - a good put in???

Post by Shark Attack » Fri Mar 25, 2011 9:31 am

20 years ago that was the "normal" float on the Cadron. The put-in and parking area were on the downstream side of the bridge. The landowners simply got tired of all the trash and associated problems with allowing access and mostly ended all access and strongly discouraged any use of that access.
Wes

71dartswinger
.
.
Posts: 26
Joined: Mon May 04, 2009 12:52 am
Name: Chris

Re: Mill Bridge on the Cadron - a good put in???

Post by 71dartswinger » Fri Mar 25, 2011 8:15 pm

About 13.7 miles... It is weird because the Arkansas map shows the bridge as a launch site. It is easier than the the Pinnacle bridge, but not as good as the 65 and the 285. The best part is the section from pinnacle to 65, but it is so short. The other sections are nice and have some rapids, but several flat stretches. I am not sure if this link will work.

http://maps.google.com/maps/ms?ie=UTF8& ... 9&t=h&z=13

User avatar
Shark Attack
....
....
Posts: 443
Joined: Fri Aug 19, 2005 5:09 pm
Location: Round Mountain, AR

Re: Mill Bridge on the Cadron - a good put in???

Post by Shark Attack » Fri Mar 25, 2011 9:04 pm

O.K. I'm giving you guys a "heads up" do not use the Mill Bridge to launch into the Cadron. Dr. Svensons brother and I did about three or four years ago and the results were not good.
Wes

User avatar
Wildwood
.....
.....
Posts: 717
Joined: Mon Feb 15, 2010 11:10 am
Name: Jan Johnson
Location: Van Buren County

Re: Mill Bridge on the Cadron - a good put in???

Post by Wildwood » Sat Mar 26, 2011 8:33 am

????????????Whut happened? :shock: Were there trolls undere the bridge???
Jan Johnson

"Life shouldn't be a journey to the grave intending to arrive safely in an attractive, well preserved body, but rather to skid in sideways, a paddle in your hands, body totally worn out and screaming "WOO HOO what a ride!"

User avatar
Chester
....
....
Posts: 430
Joined: Thu Jun 30, 2005 8:53 am
Location: Hot Springs
Contact:

Re: Mill Bridge on the Cadron - a good put in???

Post by Chester » Sat Mar 26, 2011 11:00 am

I launched there last year or the year before and didn't have any trouble. There enuf room to park one or two vehicles without blocking the road to down under the bridge. Or you can 4x4 to under the bridge. Like everywhere else, I think it's just who comes along, not sure if the landowner minds anymore or not.

User avatar
Wildwood
.....
.....
Posts: 717
Joined: Mon Feb 15, 2010 11:10 am
Name: Jan Johnson
Location: Van Buren County

Re: Mill Bridge on the Cadron - a good put in???

Post by Wildwood » Sat Mar 26, 2011 11:28 am

I thought I'd go over there again, talk to some folks there, ask how to get permission to use the area/put in, inside the fenced area. I wonder if someone just charges to get in the gate. Or if there's a place like Mrs. Helton's door to leave $$.

Jan
Jan Johnson

"Life shouldn't be a journey to the grave intending to arrive safely in an attractive, well preserved body, but rather to skid in sideways, a paddle in your hands, body totally worn out and screaming "WOO HOO what a ride!"

71dartswinger
.
.
Posts: 26
Joined: Mon May 04, 2009 12:52 am
Name: Chris

Re: Mill Bridge on the Cadron - a good put in???

Post by 71dartswinger » Sat Mar 26, 2011 4:57 pm

The southwest side of the bridge has a picnic like area. The gate said use by permission only. I don't know who owns it, or I would probably offer some time or money to use it. The northwest side is a shooting club or something now.

User avatar
Cowper
.....
.....
Posts: 2423
Joined: Sun Jul 10, 2005 10:39 am
Name: Cowper C
Location: Conway, AR
Contact:

Re: Mill Bridge on the Cadron - a good put in???

Post by Cowper » Mon Mar 28, 2011 7:25 pm

I used it at least once last year, and went down there two or three other times just to look around. No problems were experienced, but that could just be the luck of the draw.

Most times I visited, I tried to address some of the trash issues; I'd recommend anyone using that access pick up a garbage bag's worth of trash and try to make it obvious by putting the trash bag near your parked vehicle.
Trash: Get a little every time you go!

User avatar
Clif
.....
.....
Posts: 963
Joined: Thu Jun 30, 2005 11:20 am
Location: Bee Branch

Re: Mill Bridge on the Cadron - a good put in???

Post by Clif » Tue Mar 29, 2011 6:01 am

Phone numbers are posted on both sides of the river downstream of the bridge, at the private park and the bird farm. Any body call yet?

The "road" by the bridge has been intentionally blocked and is VERY washed out. No signs or purple tho
You sure this is on the right channel?

User avatar
Wildwood
.....
.....
Posts: 717
Joined: Mon Feb 15, 2010 11:10 am
Name: Jan Johnson
Location: Van Buren County

Re: Mill Bridge on the Cadron - a good put in???

Post by Wildwood » Tue Mar 29, 2011 8:51 pm

Clif, I have not been back. I'll go the first of the week, tho.

Jan
Jan Johnson

"Life shouldn't be a journey to the grave intending to arrive safely in an attractive, well preserved body, but rather to skid in sideways, a paddle in your hands, body totally worn out and screaming "WOO HOO what a ride!"

Post Reply

Social Media

       

Who is online

Users browsing this forum: Bing [Bot] and 1 guest