Semi dry guy

Paddling gear and boat review
Post Reply
       
User avatar
LARAMY
..
..
Posts: 129
Joined: Sun Sep 16, 2007 4:05 pm
Name: LARAMY
Contact:

Semi dry guy

Post by LARAMY » Mon Jan 28, 2008 9:06 pm

I'm done with the latex gaskets. I would rather get a little wet than choked any day of the week. That being said does anyone have a semi dry top that they really like? I'm trying to decide between the NRS motion soft shell and the X-pert Flex at www.extrasport.com Anyone tried either of these?

Crane
.....
.....
Posts: 787
Joined: Fri Jul 01, 2005 10:45 am

Post by Crane » Tue Jan 29, 2008 8:05 am

I have a semi-dry IR I really have enjoyed...
Crane

Zach
..
..
Posts: 190
Joined: Sat May 06, 2006 10:01 pm
Location: Boulder, CO

Post by Zach » Tue Jan 29, 2008 9:29 am

Have you tried trimming the neck gasket a little?

User avatar
okieboater
.....
.....
Posts: 1944
Joined: Mon Jul 04, 2005 9:21 pm
Name: David L. Reid
Location: Jenks, Oklahoma

Post by okieboater » Tue Jan 29, 2008 11:56 am

I have the NRS neoprene push thru neck with latex wrist gaskets.

I have been using it since last fall when they went on sale to now going to the lake for roll practice.

I am very impressed with it. I have the Stolquist heavy duty latex neck and wrist gasket on my standard dry top for cold weather.

The neoprene neck seal so far has been dry as the latex while doing roll practice.

Have not done a swim yet, and do not want to, but I am really surprised at how dry the NRS semi dry neck gasket has been.
Okieboater AKA Dave Reid

We are not sure when childhood ends and adulthood begins.

We are sure that when retirement begins, childhood restarts

scott yarbrough
.
.
Posts: 59
Joined: Fri Jul 22, 2005 12:03 pm
Location: Lakewood, CO

Post by scott yarbrough » Tue Jan 29, 2008 12:39 pm

The factory latex gasket will try it's best to suffocate you on the side of the river, if you have not trimmed them to fit your neck.(or unless you are Ethiopian)

If trimming isn't working for you the Immersion Research semi dry tops and bottoms seem to work really good. A little water will run down the back of my neck after rolling. However,,,, everything is relative.

User avatar
LARAMY
..
..
Posts: 129
Joined: Sun Sep 16, 2007 4:05 pm
Name: LARAMY
Contact:

Post by LARAMY » Tue Jan 29, 2008 12:58 pm

I tried ever stretching method advised to me on the message board and then some. I decided before I took a razor blade to it, and possibly ruin it, that I would just sell it. I was really just wondering if anyone had tried the 2 mentioned in the original post.

And I'll look at IR's--Thanks Larry

scott yarbrough
.
.
Posts: 59
Joined: Fri Jul 22, 2005 12:03 pm
Location: Lakewood, CO

Post by scott yarbrough » Tue Jan 29, 2008 1:44 pm

That's what those rings are for. Cut away,,,, they are tougher than you think. Just start strait and end strait with no sharp "V" where a tear could get started.

Post Reply

Social Media

       

Who is online

Users browsing this forum: No registered users and 0 guests