Buffalo Canoe - What year was it made?

Open Discussion
BangBang
.
.
Posts: 15
Joined: Thu Jan 23, 2014 7:52 am
Name: Phil

Re: Buffalo Canoe - What year was it made?

Post by BangBang » Thu Jan 23, 2014 4:52 pm

Shark Attack! Man thank you! Went out and looked. 2008 model. So if the rumors are true about the 2009 stuff having different materials, it looks like I missed it by a year! Stoked! Thank you for the info!

User avatar
kru1
.....
.....
Posts: 765
Joined: Wed Jan 18, 2006 12:38 pm
Name: Kristian
Location: slow-town

Re: Buffalo Canoe - What year was it made?

Post by kru1 » Thu Jan 23, 2014 5:58 pm

What if the last two numbers are 24?

kru
I say, and I intend it emphatically, let the river be.
Thomas Hart Benton, on the Buffalo River

BangBang
.
.
Posts: 15
Joined: Thu Jan 23, 2014 7:52 am
Name: Phil

Re: Buffalo Canoe - What year was it made?

Post by BangBang » Thu Jan 23, 2014 6:18 pm

ON my serial number the last 4 digits are etched in. Like, by hand with a sharp tool. The first 8 are etched by a machine. My last 4 are D808. Hope this helps. I literally had to take a picture with my phone and use the flash to see it. Look closer.

User avatar
Deuce
ACC President
Posts: 1799
Joined: Mon Nov 01, 2010 3:09 pm
Name: Luke Coop
Location: Dogtown

Re: Buffalo Canoe - What year was it made?

Post by Deuce » Fri Jan 24, 2014 8:15 am

kru1 wrote:What if the last two numbers are 24?

kru
Well, then that means it was made in 2024 and the original owner had to hop in the Delorean to go get it. Duh. Surprised at you, Kru. :poke2:
You come too.
Robert Frost

User avatar
kru1
.....
.....
Posts: 765
Joined: Wed Jan 18, 2006 12:38 pm
Name: Kristian
Location: slow-town

Re: Buffalo Canoe - What year was it made?

Post by kru1 » Fri Jan 24, 2014 8:27 am

Deuce wrote:
kru1 wrote:What if the last two numbers are 24?

kru
Well, then that means it was made in 2024 and the original owner had to hop in the Delorean to go get it. Duh. Surprised at you, Kru. :poke2:

Well then good news, Royalex is still around in 2024.

kru
I say, and I intend it emphatically, let the river be.
Thomas Hart Benton, on the Buffalo River

User avatar
okieboater
.....
.....
Posts: 1944
Joined: Mon Jul 04, 2005 9:21 pm
Name: David L. Reid
Location: Jenks, Oklahoma

Re: Buffalo Canoe - What year was it made?

Post by okieboater » Fri Jan 24, 2014 8:57 am

I am seeing some discussions that indicate either tupperwear type plastic or glass will be the canoe replacement for Royalex.

I have had experience in a kevlar explorer in Boundary Waters and man was it a sweet boat especially on portage trails.

so far I have found the tupperwear type canoes way more heavier than I think I can manage. And, am afraid of the glass versions might not handle the rocks and boof moves we have here in the Ozarks.

I along with boaters like Dennis B did a lot of area boating in glass kayaks. We all became familiar with how to patch hulls.

No experience with glass canoes loaded with gear doing trips here around the Ozarks. Interested to hear opinions on those who are familiar.
Okieboater AKA Dave Reid

We are not sure when childhood ends and adulthood begins.

We are sure that when retirement begins, childhood restarts

User avatar
Deuce
ACC President
Posts: 1799
Joined: Mon Nov 01, 2010 3:09 pm
Name: Luke Coop
Location: Dogtown

Re: Buffalo Canoe - What year was it made?

Post by Deuce » Fri Jan 24, 2014 9:03 am

kru1 wrote:
Deuce wrote:
kru1 wrote:What if the last two numbers are 24?

kru
Well, then that means it was made in 2024 and the original owner had to hop in the Delorean to go get it. Duh. Surprised at you, Kru. :poke2:

Well then good news, Royalex is still around in 2024.

kru
We should have surmised that anyway. Not sure anything else could survive the trip what with the flames and the giant cable and all. Frankly I'm surprised anyone could get a playboat on that thing, let alone a sixteen foot tandem.
You come too.
Robert Frost

Moniker
..
..
Posts: 170
Joined: Wed Apr 04, 2012 11:01 pm
Name: Don
Location: Mena

Re: Buffalo Canoe - What year was it made?

Post by Moniker » Fri Jan 24, 2014 10:48 pm

Wow,that dose'nt look much like my '99 model Buffalo,mine has aluminun square tubing gunnels.I have some delamination but it was a livery boat from Turner Bend.
The curing process would explain why my brand new Wenonah Argosy seems to gouge so easily,I did'nt even realize I was damaging the boat until I took it out of the water.
The plastic in my old Outrage seems to take abuse a lot better,my main concern with it is low water and wearing the outer layers off.
"If it's a dull party,leave it that way."
Flo to Andy Capp

Moniker
..
..
Posts: 170
Joined: Wed Apr 04, 2012 11:01 pm
Name: Don
Location: Mena

Re: Buffalo Canoe - What year was it made?

Post by Moniker » Fri Jan 24, 2014 11:04 pm

BangBang wrote:ON my serial number the last 4 digits are etched in. Like, by hand with a sharp tool. The first 8 are etched by a machine. My last 4 are D808. Hope this helps. I literally had to take a picture with my phone and use the flash to see it. Look closer.
Same here but I already had a photo stored in my files just in case(heaven forbid)something happened to my boat.
I would recomend taking a shot of all your boats serial numbers.It's a lot easier to find than hunting through papers and could be accessed from anywhere.
"If it's a dull party,leave it that way."
Flo to Andy Capp

User avatar
Randy Dodson
....
....
Posts: 384
Joined: Sat Jul 02, 2005 7:46 am
Location: Searcy AR

Re: Buffalo Canoe - What year was it made?

Post by Randy Dodson » Sat Jan 25, 2014 9:28 pm

Just my opinion, all royalex canoes gouge easier since Spartech bought Uniroyal's royalex division in 2000 (no matter how long the royalex has cured).
Parrot Head Paddler

User avatar
redboat100
.
.
Posts: 26
Joined: Wed Jul 02, 2014 5:51 pm
Name: Gary Gordon
Location: Jasper Arkansas

Re: Buffalo Canoe - What year was it made?

Post by redboat100 » Thu Jul 03, 2014 2:23 am

I make Buffalo Canoes Gary Gordon I will give you some stickers call8704465951 we will be making canoes oct 2014 a better material 10% lighter 20x more abrasive do tell every one .

EricClay
.
.
Posts: 27
Joined: Sun Jun 29, 2014 12:50 pm
Name: Eric
Location: Sherwood

Re: Buffalo Canoe - What year was it made?

Post by EricClay » Thu Jul 03, 2014 4:27 pm

Just to let everyone know, I spoke with Gary Gordan above me. He will be making the canoes and I will be owning one. Sounds like he decribing a similar material Jackson uses for their Kayaks.

User avatar
sig
.....
.....
Posts: 615
Joined: Fri Apr 20, 2012 5:25 pm
Name: Bryan

Re: Buffalo Canoe - What year was it made?

Post by sig » Thu Jul 03, 2014 4:41 pm

He's probably talking about the T-Formex material that Esquif announced as a replacement to Royalex...

http://canoekayak.com/canoe/royalex-2-0/" onclick="window.open(this.href);return false;
Bryan Signorelli

User avatar
wisefloater14
.
.
Posts: 28
Joined: Fri May 30, 2014 9:31 am
Name: joe wise
Location: Little Rock

Re: Buffalo Canoe - What year was it made?

Post by wisefloater14 » Fri Jul 04, 2014 10:58 am

Hi
I know the owner of Buffalo Canoes.
Your boat is called a Second (Blem).
It is not a First.
The difference is in the thickness of the plastic.
From time to time my friend would order plastic and some of the sheets would be thinner than others.
Your boat is abs plastic made by Royalex , which is a commercial grade plastic.

The Seconds are sold to some retailers and concessionaires, at a discounted price.
My friend makes it clear to whomever purchases them they are Seconds.
How the Seller moves the boat is not under his control.

I just spoke with the owner on the phone and he wanted me to tell you he would repair your boat.
Yes, he can do it. I have seen him repair one just like yours.
O, if you want decals, I can make that happen.

Let me know if you want to act on getting your boat repaired.

Sincerely
Joe Wise

User avatar
redboat100
.
.
Posts: 26
Joined: Wed Jul 02, 2014 5:51 pm
Name: Gary Gordon
Location: Jasper Arkansas

Re: Buffalo Canoe - What year was it made?

Post by redboat100 » Fri Jul 04, 2014 12:39 pm

I make buffalo canoes the 2nd canoes are thinner or theirs a defect I can fix that boat I weld plastic I will fix it for you no charge for welding 30 bucks for gunwale that's my cost I have stickers Gary Gordon 8704465951 the thin plastic is another mfgs sheet it is thin for lots of reasons portage not designed for my mold not made for rentals I did not sell it as a first that would be wrong they changed the plastic because of EPA regulations 1985 I will be making T-formex material next year 10% lighter 20x more abrasive again I can fix it I don't need a unhappy customer please let me help gary

Post Reply

Social Media

       

Who is online

Users browsing this forum: Ahrefs [Bot], Bing [Bot], Semrush [Bot] and 6 guests